This reference design describes a cost-effective, low-power liquid-level measurement data acquisition system (DAS) that use a compensated silicon pressure sensor and a high-precision delta-sigma ADC.

Hydrostatic pressure produced by the water column at the bottom of the controlled liquid reservoir uses the trapped air in the measurement tube to produce the same amount of pressure on the sensor. At ...

The CLD/P Series of multi-function conductive-liquid level controllers are designed to allow easy monitoring of two to four level points, with simple selection of functions, including filling, ...

In most applications, level measurements need to be quantified and sent electronically to an automation system, which requires some type of instrument. Sorting through the instrument selection process ...

It takes a large number of control valves to run a power plant, and while some valves are more critical to plant operations than others, it always follows that when a severe service valve fails, the ...

AutomationDirect’s ProSense line of level sensors now includes SLT series submersible level transmitters designed for applications such as lift station monitoring, construction by-pass pumping, tank ...

The right level instrumentation is key to keeping boilers on an even keel. Guided-wave radar offers a critical combination of capabilities. If asked to make a short list of factors able to improve ...